新闻中心
News Center

Auto rotary oil seal Small make up to tell you Oil seal is lax and countermeasures of the spill

　　1, master the basic knowledge of and identification of false and inferior product, quality and standard of choose and buy oil seal.

　　2, when installation, if the outside diameter of axle surface roughness is low or there are defects such as rust stain, rust, burr, with a fine emery cloth or abrasive polishing smooth; On the oil seal lip or trunnion position corresponding to clean oil or grease. Oil seal outer coated with sealant, use hard paper to wrap shaft keyway position, avoid scratch oil seal lip, with a special tool rotary press it into a seal to, dont be hard to hit hard, in case of deformation or crowded broken springs and oil seal failure; If the flange flanging, spring, fall off and oil seal must be removed to reload the skew. It should be noted that: when there is no wear and diameter of axle seal spring force is enough, do not tighten the spring.

　　3, the application in mechanical oil seal on the general working conditions, environmental temperature, dust, machine vibration force changing frequently make part, regular inspection, maintenance and maintenance.

　　4, such as the diameter of axle and bearing wear severely; Oil seal rubber aging or spring failure, etc., should be in time for repair and replacement parts accordingly.

　　5, the abnormal heating components or assemblies shall be timely troubleshooting; Avoid mechanical overspeed and overload operation, to prevent the oil seal lip temperature, aging and lip early wear of rubber, etc.

　　6, often should check the oil oil level, if too much oil impurities, entity alloy powder, metal scrap iron to completely replac the new oil. By changing oil brand and quality to meet the requirements of the season. Suggested that matt ray super sealant is added in the oil & lubricants, it is a wonderful gearbox additives, can be in an inert material film is formed on the parts, it can reduce the leakage of oil seal, prolong the service life of gear oil seal, also can reduce the noise of gear box, the matt ray super seal lubricants used or not for oil pollution caused by the deterioration of oil product.